SELECTED PROJECTS

Rover Swarm
2018-2019 Yale Aerospace 2018-2019 Yale Aerospace

Rover Swarm

In 2018-2019, the Rover Swarm team set out to develop, build, and create software for a small swarm of miniature rovers to accomplish lab-based planetary exploration tasks.

Read More
Tiltrotor
2017-2018 Yale Aerospace 2017-2018 Yale Aerospace

Tiltrotor

The primary goal of this project was to design and fabricate an unmanned tiltrotor aircraft capable of taking off and landing vertically as well as flying using its wings for lift. The aircraft was completely designed and built by undergraduates, and this project will advance YUAA’s knowledge and experience with RC airplanes and rotorcraft. At the conclusion of the year, the tiltrotor was ready for vertical flight testing, and it had been demonstrated that the aircraft could output significantly greater thrust than its own weight.

Read More
High Performance UAV
2015-2016 Yale Aerospace 2015-2016 Yale Aerospace

High Performance UAV

The High-Performance UAV project concentrated on designing, constructing, and flying a fixed-wing uncrewed aerial vehicle (UAV) and ground station capable of receiving a live video and telemetry stream. High performance metrics included time aloft, maximum airspeed, distance flown, and adherence to the designed flight plan. These efforts aligned with the aerospace industry today, creating more sustainable, efficient, and environmentally sound air transportation methods.

Read More

2010-2011

Timeline
Horizon
High Altitude Balloon
Horizon
High Altitude Balloon

On April 26, 2011, YUAA successfully launched and retrieved the YUAA Horizon, a second-generation high-altitude vehicle built by the YUAA. Horizon remains one of the most advanced amateur balloons to date, featuring two independent tracking systems, a failsafe aborting mechanism, a camera, and sophisticated software applications for real-time tracking on the ground.

Read More →
High Altitude Balloon
Babelon
High Altitude Balloon
Babelon
High Altitude Balloon

Project Babelon, named as a cross between the Tower of Babel and Balloons, was the first project of the Yale Undergraduate Aerospace Association (YUAA), was then known as the Yale Air & Space Group (ASG).

Read More →
High Altitude Balloon

2011-2012

Timeline
SkyView
High Altitude Balloon
SkyView
High Altitude Balloon

SkyView improved on Explorer by optimizing high-altitude flight, tracking, and image capture. Launched in Spring 2012, an unfortunate gust of wind caused SkyView to land 4.3 miles off the coast of Connecticut, causing high-resolution images and the vehicle to be non-recoverable. Its estimated altitude was 11,200 meters.

Read More →
High Altitude Balloon
Explorer
High Altitude Balloon
Explorer
High Altitude Balloon

Explorer was a high-altitude aircraft designed for atmospheric exploration and research. It featured an unparalleled array of tools and capabilities compared to former YUAA balloons and launched in January 2012.

Read More →
High Altitude Balloon

2012-2013

Timeline
Quadcopter
Atmospheric Flight
Quadcopter
Atmospheric Flight

The Quadcopter team built a four-rotor helicopter, or quadcopter, using a variety of sensors to ensure stable flight. The craft carried a high-definition camera on board to capture footage from angles otherwise impossible to reach.

Read More →
Atmospheric Flight
Command Center
Avionics
Command Center
Avionics

The Command Center was designed to fulfill the electronics needs of any future craft developed by the organization. The main goal was to create a modular package capable of redundant communications methods, computational processing, location tracking, motor control, and sensor data logging.

Read More →
Avionics
Astro-Egg Lander
Rocketry, Competition, Awarded, 1st Place, High-Powered Rocketry
Astro-Egg Lander
Rocketry, Competition, Awarded, 1st Place, High-Powered Rocketry

On April 6, 2013, YUAA won the Astro-Egg Lander event of the Battle of the Rockets Competition in Culpeper, Virginia. The team designed and built a rocket and lander capable of launching an egg up 1,500 feet and recovering it safely without a parachute. The team’s rocket, the YSS Eli Whitney, flew six times, including both test and competition launches.

Read More →
Rocketry, Competition, Awarded, 1st Place, High-Powered Rocketry
Target Altitude
Rocketry, Hybrid Rocketry
Target Altitude
Rocketry, Hybrid Rocketry

During the Spring of 2013, YUAA team members to launch a rocket to an altitude of 1,700 ft in preparation for the Battle of the Rockets Competition in Culpeper, Virginia. Our team used the Contrail G100 hybrid rocket motor, fulfilling the requirement for participants to use a commercially available rocket motor

Read More →
Rocketry, Hybrid Rocketry

2013-2014

Timeline
IREC 2014
Rocketry, High-Powered Rocketry, Competition, IREC, Awarded, 2nd Place
IREC 2014
Rocketry, High-Powered Rocketry, Competition, IREC, Awarded, 2nd Place

The Rocket Competition team built Chronos, a rocket designed to fly 10,000 feet while carrying an atomic clock that attempted to measure relativistic effects during the 2014 Intercollegiate Rocket Engineering Competition (IREC) hosted by ESRA. The team was awarded 2nd in the SDL Payload Competition (out of 36 teams) and additional recognition from the judges for the experimental subject.

Read More →
Rocketry, High-Powered Rocketry, Competition, IREC, Awarded, 2nd Place
Rocket Launched UAV
Rocketry, High-Powered Rocketry, Atmospheric Flight, UAV
Rocket Launched UAV
Rocketry, High-Powered Rocketry, Atmospheric Flight, UAV

The Rocket Launched UAV project aimed to fire a 15ft rocket (Omega) with an autonomous Unmanned Aerial Vehicle (UAV) in its payload. Successful flights of the UAV and the ascent of Omega were achieved.

Read More →
Rocketry, High-Powered Rocketry, Atmospheric Flight, UAV
Lighter than Air
Atmospheric Flight, UAV, Competition
Lighter than Air
Atmospheric Flight, UAV, Competition

The Lighter than Air UAV project was intended to provide new, less experienced YUAA members with the opportunity to design and build a competition-ready UAV (Unmanned Aerial Vehicle). Lighter than Air is an aerospace design competition sponsored by the American Society of Mechanical Engineers (ASME).

Read More →
Atmospheric Flight, UAV, Competition
Quadcopter
Atmospheric Flight
Quadcopter
Atmospheric Flight

The Quadcopter team built a four-rotor helicopter, or quadcopter, using a variety of sensors to ensure stable flight. The craft carried a high-definition camera on board to capture footage from angles otherwise impossible to reach.

Read More →
Atmospheric Flight

2014-2015

Timeline
Radio Astronomy
Astronomy, Telescope, Awarded, White House Astronomy Night Commended
Radio Astronomy
Astronomy, Telescope, Awarded, White House Astronomy Night Commended

The Radio Astronomy team created a fully steerable radio satellite dish with signal-processing hardware and software. Along the way, project members were taught the basics of astronomy, signal processing, and data processing. To spread this knowledge, we held demonstrations of the dish functionality at high schools in and around the New Haven area. This project, along with CubeSat, was mentioned at the 2015 White House Astronomy Night.

Read More →
Astronomy, Telescope, Awarded, White House Astronomy Night Commended
Multi-Stage Rocket
Rocketry, High-Powered Rocketry, Multi-Stage Rocketry
Multi-Stage Rocket
Rocketry, High-Powered Rocketry, Multi-Stage Rocketry

The multi-stage rocket project focused on successfully launching and recovering a rocket two or more stages. It successfully launced to 9617 feet.

Read More →
Rocketry, High-Powered Rocketry, Multi-Stage Rocketry
Advanced UAV
UAV, Atmospheric Flight
Advanced UAV
UAV, Atmospheric Flight

This team aimed to design and build an unmanned autonomous vehicle (UAV) capable of target recognition, payload drops, and flight via GPS-bounded coordinates.

Read More →
UAV, Atmospheric Flight
Battle of the Rocket 2015
Rocketry, High-Powered Rocketry, Competition, Rover
Battle of the Rocket 2015
Rocketry, High-Powered Rocketry, Competition, Rover

The Rocket Competition team designed and constructed rockets and a payload to compete in two events at the Battle of the Rocket Competition. For the Target Altitude event, a rocket was built with the capability of reaching exactly 1,625 feet using a G motor. For the Planetary Rover event, the team constructed a rover and rocket system to launch more 1,000 feet on a K motor. The rover was contained within the 11-foot tall, 7.5-inch diameter rocket during its ascent and released with its own recovery system to land and perform a tasks on the ground. The competition was held on March 28th in Culpeper, Virginia.

Read More →
Rocketry, High-Powered Rocketry, Competition, Rover